Woodward GCP-31 Series - Page 25

Manual 37240C GCP-30 Series - Genset Control
Set up the window Settings for Mo-
dem like shown on the left.
Note: If a connection is to be estab-
lished using an exchange line, the fol-
lowing settings are recommended:
• Initialization
- ATH&F0 (for internal connec-
tions without exchange line)
- ATH (for external connections
with exchange line)
• Establish connection
- ATX1DT (for internal connec-
tions without exchange line)
- ATDT (for external connections
with exchange line)
If no PABX is used, the 0W can be
left out.
If you select connect, the field with
the phone number appears again.
NOTE
This application is limited to 8 GCPs per interface at the moment. Please contact Woodward for bigger
plants.
© Woodward Page 25/38