Woodward GCP-31 Series User Manual

Manual 37240C GCP-30 Series - Genset Control
In LeoPC1, select in the menu Devices -> Settings and then in the section Data communication IXXAT VCI2 -
CAN as Driver, and click Settings.
Set up the window CAN Settings like
shown on the left.
Check the CAN Settings again by se-
lecting Options and CAN-ID.
© Woodward Page 9/38

Woodward GCP-31 Series Specifications

General

Brand	Woodward
Model	GCP-31 Series
Category	Controller
Language	English