Worcester GB162-100

PRODUCT OVERVIEW
6 720 648 726 (2011/07)
3
1 BC10 basic controller holder
2 Installation option for room controller, e.g. RC35
3 BC10 basic controller, can be expanded e.g. by the RC35
room controller
4 Connection box (low-voltage and 230V connections)
5 Fan harness and mains lead of the pump
6 Condensate drain outlet
7 Condensate collector
8 Boiler front door
9 Automatic air vent
10 Quick clip fasteners
11 Air inlet pipe
12 Gas pipe
13 Flue gas pipe
14 Door lock
15 Testing point for flue gas
16 Testing point for air intake
17 Air intake connection
18 Flue gas connection
19 Cover shield
20 Fan
21 Gas valve
22 Venturi
23 Burner cover
24 Flow temperature sensor
25 Ionisation electrode
26 Sight glass
27 Glow ignitor
28 Safety temperature sensor
29 Heat exchanger
30 Pressure sensor
31 Return temperature sensor
32 Universal Burner Automatic Version 3 (UBA 3)
33 Drawer with function module integration options
34 Cover shield
35 Condensate trap
Pump group (optional accessory):
36 Isolating valve, blue (CH boiler return) with pump, drain
cock, non-return valve and thermometer
37 Gas valve, yellow (GAS)
38 Isolating valve, red (CH boiler flow) with drain cock,
pressure gauge, thermometer and 4-bar pressure relief
valve
39 4-bar pressure relief valve and securing pin
40 Pressure gauge
41 Drain valve
42 Isolating valve
43 Thermometer (optional accessory)
The pump group also includes an insulation cover (see also pump
group installation instructions).