World Cat 280DC-X - Chapter 7: Maintenance and Service; 7.1 Overview; 7.2 Gelcoat Maintenance; 7.2.1 Cleaning

33
6.11 Engine / Gauges
Your World Cat 280DC-X comes with twin Yamaha
®
200 HP 4-strokes with Command Link
®
Plus. Operang
instrucons for your engines and gauges will be in a separate Yamaha Owner’s Manual and your Command
Link
®
Plus Owner’s Manual delivered with your boat.
6.12 Plumbing System
The intake and discharge of water is integral to several of the features and accessories provided on your
boat, including livewells, shboxes, sanitaon devices, and water systems. World Cat installs the plumbing
components for these systems using high quality marine hoses and stainless clamps. However, this does not
eliminate the need for roune checks of plumbing components or connecons. A failure resulng from a
deteriorated hose or connecon could cause your boat to take on water or become swamped. Informaon
is provided in Chapter 10 of this manual, regarding the locaon, funcon, and roung for the plumbing
components on your boat. Review these materials and talk with your dealer should you have a queson.
NOTICE
While underway, leaving your livewell seacock open could result in inadvertently lling your livewell.
To prevent this, close the seacock when the pump is not in operaon.
NOTICE
Operang the engines in reverse can cause excessive venlaon near the livewell intake, causing the
pump to airlock. To prevent this, turn the pumps “OFF” prior to any connuous or high speed reverse
operaon. If your pump does becomes air locked, turn the pump “OFF” for 15 to 30 seconds to
correct the problem.