page 56 of 84
Example: Two BlueLEVEL BASIC and a BlueMETER BASIC are connected
Remark:
The configuration has to be done first on the BlueMETER BASIC
• 1 BlueLEVEL BASIC with the address H0200 is connected to Port “A”
• 1 BlueLEVEL BASIC with the address H0201 is connected to Port “B”
• Measuring-mode: Display of values instruments on Port "A" and "B" simultaneously
Meaning of the display:
090
H0200B
+0.000022
H0201B
-0.000048
Continuous number
BlueLEVEL BASIC with the address H0200 is connected to Port “A”
+0.000022 Rad respectively +22 µRad
BlueLEVEL BASIC with the address H0201 is connected to Port “B”
-0.000048 Rad respectively -48 µRad
To Next Page
Loading...
