Page 28 of 42 pages
2.2.3.8 Collecting the measured data from a LEVELMETER 2000 to a PC when using the
WYLER software LEVELSOFT
When using the Software Levelsoft in combination with a LEVELMETER 2000
the key <ENTER> has the identical function as the push button of the
connecting cable (Dongle cable) or the push button of the infrared sender unit
for data collection.
R
EMARKS
This may be useful when the data collecting cable is defective
or the infrared sender is not working. (push button defective,
battery empty)
2.2.3.9 Switch the Levelmeter 2000 off
press continuously until the display dies out.
(Battery operated: automatic sleep mode after approx. 8 minutes)
Disabling the automatic shut-off of the LEVELMETER 2000
When pressing the
ON/MODE key for more than 3 seconds the display starts flashing and the automatic
shut off is disabled. In the standard mode the instrument shut off after about 10 minutes.
Exception: In case the LEVELMETER 2000 is powered by a connection to a mains adapter, the instrument is
never shutting off automatically.
To Next Page
Loading...
Need help?
General
