Xenon 1900 User Manual

11 - 19
Number of Beeps -
Good Read
*1 BEPRPT1 4-6
Range 1 - 9 BEPRPT# 4-6
Beeper Volume Max Beeper Volume Max PAPBLM 4-6
Good Read Delay *No Delay DLYGRD0 4-7
Short Delay (500
ms)
DLYGRD500 4-7
Medium Delay (1000
ms)
DLYGRD1000 4-7
Long Delay (1500
ms)
DLYGRD1500 4-7
User-Specified Good
Read Delay
Range 0 - 30,000
ms
DLYGRD##### 4-7
Manual Trigger
Modes
*Manual Trigger -
Normal
PAPHHF 4-8
Manual Trigger -
Enhanced
PAPHHS 4-8
LED Illumination -
Manual Trigger
Off PWRNOL0 4-8
Low PWRNOL100 4-8
Medium (Xenon
only)
PWRNOL120 4-8
*High PWRNOL150 4-8
Serial Trigger Mode Read Time-Out
(0 - 300,000 ms)
*30,000
TRGSTO#### 4-9
Presentation Mode Presentation Mode -
Xenon
TRGMOD3 4-9
Presentation Mode -
Granit
PAPTPR 4-9
LED Illumination -
Presentation Mode
Off PWRLDC0 4-10
Low PWRLDC100 4-10
*High PWRLDC150 4-10
Presentation LED
Behavior After
Decode
*LEDs On TRGPCK1 4-10
LEDs Off TRGPCK0 4-10
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page

Xenon 1900 Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Connectivity	USB, RS-232, Keyboard Wedge
Humidity	5% to 95% (non-condensing)
Connectivity Technology	Corded
Decode Capability	1D and 2D barcodes
Light Levels	0 to 100, 000 lux
Scanning Technology	Area Imager
Interface	USB, Keyboard Wedge, RS232, IBM 46xx (RS485)
Light Source	LED