Paper and other Media
Xerox 4112/4127 EPS 2-9
User Guide
2. Fan and load the paper, then squeeze and slide both paper guides so they just touch the
paper stack.
Note
When loading drilled stock, place the paper with its drilled side to the right. When loading
tab stock, place the tabs to the left.
3. Move the Paper Weight Switches to match the weight of the paper stock in the tray.
Note
For paper heavier than 256 gsm, slide the Paper Weight Switches to the heavier weight
position (257 - 300 gsm). Failure to do so may result in paper jams.
drilled edge
tabbed
To Next Page
Loading...
Need help?
General