Page 2-28 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Getting Started
Test Print or Scan
To ensure the Xerox WorkCentre M20 or M20i has been installed correctly a test print or scan
should be submitted from the Workstation.
Test Print
Perform the following steps:
¾ Open a document on the Workstation.
¾ Select the Xerox WC M20 Series as the printer to which the document will be sent.
¾ Print the selected document on the device and verify that it prints correctly.
The installation process is now complete.
Test Scan
¾ Open the Twain compliant application being used to scan documents.
¾ Follow the instructions provided in “Scan” starting on page 8-1 to scan a document and
verify that it scans correctly.
The installation process is now complete.
1
2
3
1
2
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
