Xerox D35 - Documentation

Xerox
®
D35 Scanner Welcome
2-2 User Guide
– 1 to 3 GB for each additional application
A VGA OR SVGA MONITOR:
• The recommended settings for your monitor are:
– Color quality of 16-bit or 32-bit
– Resolution set to at least 800 x 600 pixels
Documentation
The following printed documentation is provided in the box:
• Installation guide—abbreviated scanner setup and installation instructions.
• Technical Support and Warranty Information—contact information for technical support
and customer service, and a brief overview of our standard product warranty.
• Register Your Scanner and Review Card — follow the instructions on the card to register
your scanner. Please take a moment to write a short review of your experience with this
scanner.
The following soft-copy documentation is available during installation or on
www.xeroxscanners.com
:
• Scanner user guide—instructions for scanner setup, installation, operation, maintenance,
safety, and warranty. The instructions in this guide cover how to properly use the scanner and
perform maintenance. Please refer to your scanning application’s user guide or help file for
instructions on how to access the scanner’s interface, scan and save files.
• TWAIN scanning guide—instructions for scanning using the TWAIN interface. This guide
describes the options available in the TWAIN interface. Please refer to your scanning
application’s user guide or help file for instructions on how to access the scanner’s interface,
scan and save files.
• Patch code sheets—use with an application that supports detection of patch code data
when using the TWAIN interface. The patch code page layouts have been specifically
designed for your scanner. The file contains Patch 1 layouts for A4 and U.S. Letter size pages.
Make sure you print the correct page size for the paper in your printer. Also, make sure the
application you are using is not set to automatically scale the page to fit on the paper in your
printer.