User Guide 3-1
1. Remove the scanner from the shipping box, verify all parts listed on page 2-1 are in the box.
We recommend that you keep the original packing materials in case you need them later.
2. Remove any shipping tape from the scanner as indicated in the following illustration(s).
The illustrations are for example purposes only. Your scanner’s packaging may vary slightly.
Connect the Scanner Power Supply
Note: Only use the power supply included with your scanner. Connecting any other type of power
supply may damage your scanner, and will void its warranty.
1. Select the appropriate plug adapter for your country.
2. Slide the appropriate plug adapter to the power supply.
3. Scanner Setup
To Next Page
Loading...
