4-6 DocuColor 250 Scan Out Services
Scanning Documents
Scanning from the Document Glass
5. Place your original document on the Document Glass.
6. Press the [Start] button on the Control Panel.
Scanning begins.
7. To scan more documents, touch [Next Original].
8. Remove the previous document from the glass, and place the next
document on the Document Glass.
9. Touch [Start] on the Touch Screen.
Repeat steps 7 through 9 for additional originals.
10. After scanning the last original, touch [Last Original].
11. Remove the last document from the Document Glass.
The job is output to the DocuSP.
To Next Page
Loading...
