Why Xerox DocuMate 6480 Scanner reports double feed error with single page?
If your Xerox Scanner reports a Double Feed error when there is only one page, dust on the sensor may be the cause. Try cleaning the double feed detection sensor.
What to do if Xerox Scanner internal part malfunctioned?
If an internal part in your Xerox Scanner may have malfunctioned, turn off the power to your scanner, reboot your computer, then turn it back on.
What to do if Xerox DocuMate 6480 Scanner lamp malfunctioned?
If the lamp in your Xerox Scanner has malfunctioned, turn the scanner off, then back on again. This issue usually occurs if the power was disconnected during a scan.
General| Media thickness (min) | 1.25 mm |
|---|---|
| Maximum scan area (ADF) | 216 x 5994 mm |
| Minimum scan area (ADF) | 51 x 51 mm |
| Scanning media types supported | Photo paper, Plastic Card |
| Maximum ISO A-series paper size | A4 |
| Auto Document Feeder (ADF) media weight | 75 - 90 g/m² |
| Scanner type | ADF scanner |
| Product color | Blue, White |
| Built-in display | Yes |
| Auto document feeder (ADF) input capacity | 120 sheets |
| Film scanning | No |
| Maximum scan size | 241 x 5994 mm |
| Output color depth | 24 bit |
| Output grayscale depth | 8 bit |
| Output monochrome depth | 1 bit |
| ADF scan speed (b/w, A4) | 80 ppm |
| Optical scanning resolution | 600 x 600 DPI |
| Duplex ADF scan speed (b/w, A4) | 160 ipm |
| Sensor type | CCD |
| Scan drivers | ISIS, TWAIN, WIA |
| Daily duty cycle (max) | 10000 pages |
| USB version | 3.2 Gen 1 (3.1 Gen 1) |
| Standard interfaces | USB 3.2 Gen 1 (3.1 Gen 1) |
| Cables included | AC, USB |
| Minimum RAM | 2048 MB |
| Minimum processor | Intel Pentium IV |
| Minimum storage drive space | 350 MB |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8, Windows 8.1 |
| Sustainability certificates | ENERGY STAR |
| Power supply type | AC |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 168 mm |
|---|---|
| Width | 316 mm |
| Height | 191 mm |
| Weight | 4700 g |
Provides general safety instructions for operating the Xerox scanner and its components.
Guidelines for safe scanner operation, including warnings and precautions for usage.
Details important electrical safety warnings and precautions for the scanner.
Information on correct electrical supply connection and grounding for the scanner.
Instructions on safely disconnecting power and emergency power-off procedures.
Step-by-step guide on connecting the scanner to a power source using the provided adapter.
Step-by-step guide to installing scanner software from the installation disc.
Instructions for physically connecting the scanner to the computer via USB and powering it on.
Steps for installing the Visioneer OneTouch software after the driver installation.
Precautions to ensure safety and prevent scanner damage during maintenance procedures.
Steps to follow when a paper jam occurs in the automatic document feeder.
Procedure for cleaning the internal components of the ADF for optimal performance.
Step-by-step guide for replacing the worn separation roller in the scanner.
Detailed instructions for replacing the feed roller in the scanner.
Common causes and solutions when the scanner fails to initiate a scan.
Explains scanner status light meanings and common error codes displayed on the LCD.
Reference table for error codes, problem descriptions, and their corresponding solutions.
To Next Page