Xerox Phaser 3020BI User Manual

Wireless Connectivity
Xerox® Phaser® 3020
User Guide
14
Wireless Connectivity
The Phaser 3020BI is compatible with 802.11 (Wi-Fi
®
) wireless networks. The location where the
machine is installed must be covered by an 802.11 wireless network. This is typically provided by a
nearby wireless access point or router, which is physically connected to the wired Ethernet that serves
the building.
The machine supports connectivity via a wireless only connection.
Note: Performing the driver installation at this time may aid wireless setup. Refer to Printer Drivers.
To configure Wireless Connectivity, use the Xerox Easy Wireless Setup. For instructions, see Wireless
Setting Program.
To set the Ethernet Speed using CentreWare Internet Services, refer to Setting the Ethernet Speed
Using CentreWare Internet Services.
Print a Configuration Report
The Configuration Report details the machine software versions and network settings configured for
the machine.
At the printer control panel, press the WPS button for 10 seconds.

Xerox Phaser 3020BI Specifications

General

Brand	Xerox
Model	Phaser 3020BI
Category	Printer
Language	English