General Care
Xerox® Phaser® 3020
User Guide
85
General Care
Redistributing Toner
When the print cartridge is near the end of its life:
• White streaks on prints or light printing occurs.
• The orange LED toner light on the control panel is blinking.
If this happens, you can temporarily improve print quality by redistributing the remaining toner in the
cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed
the toner.
Follow these steps to redistribute the toner in your print cartridge and thus temporarily improve print
quality.
1. Open the top cover.
2. Pull the print cartridge out.