EasyManuals Logo
Home>Xerox>Printer>Phaser 3020BI

Xerox Phaser 3020BI User Manual

Xerox Phaser 3020BI
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
CentreWare
®
Internet Services
Xerox® Phaser® 3020
User Guide
16
Change the Administrator Password
It is recommended that you change the default administrator password to a more secure password, so
this Xerox machine is not compromised.
1. At your workstation, open the Web browser and enter the IP Address of the machine in the
Address Bar.
2. Press Enter.
3. Select the Properties icon.
4. If prompted, enter admin for the ID and 1111 for the Password, and select Login.
5. Click Properties.
6. In Security on the left hand side, select System Security.
7. Select System Administrator.
8. In the Access Control area:
a. Ensure theWeb UI Access Control Enable check box is selected.
b. In the Login ID field, enter a new login name.
c. Select the Change password box to change the password. In the Password field, enter a new
numeric password.
d. Enter the password again in the Confirm Password field.
CAUTION: Do not forget the password or you could be completely locked out of the system,
requiring a service call.
9. Select Apply to save the changes.
10. Select OK when the acknowledgement message displays.
11. Select the Advanced button. The Advanced Access Control screen appears.
12. Select Protect Login IPv4 Address to enable this feature if required, and enter an IPv4 Address in
the box.
13. Select the required option for the Login Failure Policy, for users who fail to login several times. The
options are: Off, 3 times or 5 times.
14. Select the required option for Auto Logout. The options are 5, 10, 15 or 30 minutes.
15. Select Security Settings Reset if required.
16. Select Save to save your changes.
Setting the Ethernet Speed Using CentreWare Internet Services
1. At your workstation, open the Web browser and enter the IP Address of the machine in the
Address Bar.
2. Press Enter.
3. Select Properties.
4. If prompted, enter admin for the ID and 1111 for the Password, and select Login.
5. Click Properties.
6. In the Network Settings link select the General link.
7. Select one of the following speeds from the Ethernet Speed drop-down menu:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 3020BI and is the answer not in the manual?

Xerox Phaser 3020BI Specifications

General IconGeneral
BrandXerox
ModelPhaser 3020BI
CategoryPrinter
LanguageEnglish

Related product manuals