Google Cloud Print
Xerox® Phaser® 3020
User Guide
38
Google Cloud Print
Google Cloud Print is a service that allows you to print to a printer using your smart phone, tablet, or
any other Web-connected devices. Just register your Google account with the printer, and you are
ready to use the Google Cloud Print service. You can print your document or e-mail with Chrome OS,
Chrome browser, or a Gmail™/ Google Docs™ application on your mobile device, so you do not need to
install the printer driver on the mobile device. Refer to the Google Web site at
http://www.google.com/cloudprint/learn/ or http://support.google.com/cloudprint for more
information about Google Cloud Print.
Notes:
• Make sure the printer is turned on and connected to a wired or wireless network that has
access to the Internet.
• Depending on your security configuration, your firewall might not support Google Cloud Print.
• Set up a Google e-mail account.
• Configure the printer to use IPv4.
• Configure Proxy Server settings as needed.
1. Open a Web browser, type the IP address of the printer, then press Enter or Return.
2. Click Login and enter the ID (admin) and Password (1111).
3. Click Properties > Network Settings > Google Cloud Print.
4. To change the printer name, enter a new name in the Printer Name field.
5. If you need to enable a proxy server, select Proxy Setting and enter your proxy informaion.
6. Select Test Connection to ensure your connection with the printer is successful.
7. Click Register to register the device to Google Cloud Print.
Note: If the Claim Url link does not display when you click Register, refresh the CentreWare
Internet Services page and click Register.
8. Click the Claim Url that displays. This takes you to the Google cloud print Web site to finish the
registration.
9. Click Finish printer registration.
10. Now your printer is registered with Google Cloud Print. Click Manage your printer. Google Cloud
Print - ready devices display in the list.
To Next Page
Loading...
Need help?
General