Windows Drivers
Xerox® Phaser® 3020
User Guide
25
3. Select Install Software. A Printer Connection Type window displays.
4. Select Wireless network connection.
5. When asked if you are setting up the printer for the first time, select Yes, I will set up my printer’s
wireless network and click Next.
6. Select your wireless network from the list and click Next.
7. Enter or confirm the Network Key.
8. Click Next. The Select Software to Install window displays.
9. After the installation is finished, select Print a test page and select Finish.
If your printer is connected to the computer, a Test Print page prints. If the Test Print operation is
successful, refer to the Print chapter of this guide. If the print operation failed, refer to the
Troubleshooting chapter of this guide.
To Next Page
Loading...
