Network Installation
Phaser 4622
System Administrator Guide
21
Service Location Protocol (SLP)
SLP is a protocol that provides a flexible and scalable framework for providing hosts with access to
information about the existence, location, and configuration of networked services. SLP is useful in
enterprise networks.
To change the configuration of the Service Location Protocol (SLP) Service Agent for the printer:
1. At your Workstation, open the Web browser and enter the TCP/IP Address of the machine in the
Address bar.
2. Press Enter.
3. Click on the Properties tab.
4. Click on the Connectivity link.
5. Click on the Protocols link.
6. Click on the SLP link.
7. Check the Enable Checkbox.
8. Enter the required parameters for the SLP configuration:
•Directory Agent
•Scope 1
•Scope 2
•Scope 3
•Message Type
• Multicast Radius
•SLP MTU
• Registration Lifetime
9. Click the apply button to save the changes.
To Next Page
Loading...
