Network Installation
Phaser 4622
System Administrator Guide
26
NetWare
NDPS/NEPS
Novell
®
Distributed Print Services (NDPS) / Novell
®
Enterprise Print Services (NEPS) allow
Administrators to manage print resources centrally from anywhere on the network.
The Xerox NDPS/NEPS Solution allows you to use Novell NDPS/NEPS with many models of Xerox
printers.
Refer to www.xerox.com for installation procedures and to download the Xerox NDPS Solution.
NWAdmin
Information Checklist
Before starting the installation procedure, please ensure that the following items are available and/or
the tasks have been performed:
1. Existing operational NetWare network.
2. Login to a NetWare file server/tree as Supervisor/Administrator or have the equivalent
privileges.
3. Ensure that the machine is connected to the network via Ethernet cable.
4. Setup a Print Server object using NWADMIN. Refer to the documentation supplied by Novell to
complete this task. Record precisely (observe upper and lower case, dot notation etc.) the NDS
Tree, NDS Context Name, frame type, Print Server Name and the Print Server password assigned.
If your printer services queues on multiple file servers, the Print Server name and password must
be the same on all file servers.
Procedure
1. At your Workstation, open the Web browser and enter the TCP/IP Address of the machine in the
Address bar.
2. Press Enter.
3. Click on the Properties tab.
4. Click on the Connectivity link.
5. Click on the Protocols link.
6. Click on the NetWare link.
7. Check the Enable Checkbox.
8. Select the required Frame Type from the drop-down menu.
9. Enter a Queue Poll Interval of between 1 and 240 seconds into the field.
10. Enter the name you assigned to your print server into the Printer Server Name field.
11. Enter the print server password, in the correct case you recorded when you setup your print server
into the Print Server Password and Re-type New Print Server Password fields.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
