Printer Drivers
Phaser 4622
System Administrator Guide
45
5. Click on the OK button.
6. Click on the Next button.
7. Click on the Finish button.
8. Close the Add/Remove Programs window.
Windows Vista or later
1. Click on Start, Control Panel and double-click on Programs and Features.
2. Double-click on Windows Features.
3. In the Turn Windows Features on and off window, expand the Print Services menu.
4. Click on LPR Port Monitor to enable the service.
5. Click on the OK button. Your computer may need to restart.
Install Printer Driver
1. From the Start menu, follow the appropriate option from the list below:
• Windows 2003 - Click Settings then Printers.
• Windows XP - Click Printers and Faxes. If you cannot see this option in the Start menu, then
click on Start, followed by Control Panel first.
• Windows Vista or later - Click Control Panel then Printers.
2. Windows XP/2003:
a. Click on Add Printer in the far left column.
b. Click on the Next button for Windows XP/2003 only.
Windows Vista or later:
c. Double-click Add Printer.
Windows 7:
d. Select Add a Printer and then Add a local printer.
3. Select Local Printer attached to this computer.
Note If already selected, click on Automatically detect and install my Plug and Play printer to
deselect it.
• For Windows Vista or later - A printer attached to my computer.
Now go to step 5.
• For Windows 7 - Go to step 5.
4. Click on the Next button.
5. Click on Create a new port.
6. Select the following option from the Type of Port pull down menu:
• For Windows 2003 select LPR.
• For Windows XP/Vista or later select LPR Port.
7. Click on the Next button.
8. Enter the IP Address of the printer.
9. Enter:
• Printer name for Windows XP/2003.
• Print Queue name for Windows Vista or later.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
