Printer Drivers
Phaser 4622
System Administrator Guide
51
AppleTalk Printing
The Internet Services AppleTalk
®
page allows you to configure the machine to support AppleTalk
®
.
Information Checklist
1. The AppleTalk settings must be correctly configured on the machine.
2. Locate the CentreWare Print Drivers CD delivered with your machine.
Configure AppleTalk
1. At your workstation, open the Web browser and enter the TCP/IP address of the machine in the
Address bar.
2. Press Enter.
3. Click on the Properties tab.
4. Click on the Connectivity link.
5. Click on the Protocols link.
6. Select AppleTalk in the directory tree.
7. Click the Enabled checkbox to enable the Protocol.
8. Type a name for the machine in Printer Name.
9. Select the required Zone.
10. Click Apply to accept the changes.
If prompted, enter the Administrator’s User ID admin and Password 1111, and click on Login.
11. The settings are not applied until you reboot the machine. Click the Status tab.
12. Click the Reboot Machine button and click OK to reboot the machine. The network controller
takes approximately 5 minutes to reboot and network connectivity will be unavailable during this
time.
Install the Printer Driver
1. Follow the steps below that are specific to your operating system:
Windows XP
a. Click on Start.
b. Click on Network Connections.
Windows 2003
From the Desktop:
a. Right-click on the My Network Places icon.
b. Click on Properties.
Win NT
From the Desktop:
a. Right-click on the Network Neighbourhood icon
2. Right-click on the network connection you want to configure AppleTalk on, and then click on
Properties.
3. The Connection Properties dialog box opens.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
