Network Installation
Phaser 4622
System Administrator Guide
39
To connect to a wireless network manually using the CentreWare Internet Services:
1. At your computer, open a Web browser, in the address field, type the IP address of the printer,
then press Enter or Return.
Note If you do not know the IP address of your printer, see Finding the IP Address of Your Printer
on page 12.
2. Click Properties.
3. In the Properties pane at the left of the window, under Protocols, select Wireless Setup.
4. In the SSID field, enter the SSID.
5. To select the Network Type, from the drop-down menu, select Infrastructure or AdHoc.
Note Infrastructure provides the greatest selection of security options. AdHoc provides only WEP
encryption in most networks.
6. To select Encryption, under Security Settings, select the appropriate security option for your
router.
7. Click Save Changes.
8. Disconnect the Ethernet cable from the printer.
9. Turn off the printer, then turn it on again.
When the printer restarts, it uses the information from CentreWare Internet Services to connect with
the wireless router. Wait for two minutes, then print a Configuration Report to check the connection. If
the printer does not successfully connect with the wireless network, check your network information
and try again.
Setting Up the Printer for Wireless LANWPA-Enterprise
WPA-Enterprise Encryption is supported only when Infrastructure is selected as the Network Type in the
Wi-Fi settings section.
Note Use Internet Explorer to import the certificate from Windows. Use Safari to import
certificates from Macintosh.
1. Configure the digital certificate Purpose for wireless LAN, either (client or root certificate).
2. For the Root certificate, Enable Server Certificate Validation.
3. Configure WPA-Enterprise for EAP-TLS, EAP-TTLS.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
