Xerox Phaser 5335 User Manual

5.2 Setting the Common Menus 105
[Paper Priority]
Printer Settings
Paper Priority
Paper Priority
Plain Paper
Paper Priority
1.User 1
Paper Priority
2.User 2
Paper Priority
3.User 3
Paper Priority
4.User 4
Paper Priority
5.User 5
Setting Item Description
Plain Paper,
User 1 to User 5
Sets the priority order of paper types. This setting will be used by the Auto Tray
Selection feature. By default, [Plain Paper] is set to [1].
• [1] to [6]
Sets the priority order of paper types.
•[Off]
Does not set the priority order of paper types.
Note
• [1. User 1] to [5. User 5] display the names specified under [Paper Name].
• You can assign the same priority order to different paper types. In such case,
the printer selects a tray based on the [Tray Priority] setting.
Refer to
• " Auto Tray Selection Feature" (P. 71)

Xerox Phaser 5335 Specifications

General

Brand	Xerox
Model	Phaser 5335
Category	Printer
Language	English