114 6 Troubleshooting
CAUTION
• When removing jammed paper, do not try to remove paper or paper piece deep inside
the machine. Also, do not try to remove paper wrapped around the heat roller. It can
cause injury or burn. Switch off the machine immediately and contact your local Xerox
representative.
Important
• The fuser is hot. Do not touch areas with labels indicating high temperature and those surrounding the
labels. Otherwise, you can get burnt.
• Before opening the front cover or pulling out the paper trays, remove paper from Tray 1 (Bypass tray) (if
any paper is loaded) and close Tray 1 (Bypass tray) cover.
• Be careful not to pinch your fingers when closing a cover after removing jammed paper.
Note
• The labels with the following symbols provide jam clearance procedures. Use the labels as guides when
clearing paper jams.
Paper clearance
instruction symbol
To Next Page
Loading...
