Xerox Phaser 5335 User Manual

From B (bottom left)
([Network / Port] continued)
TCP/IP Get IP Address
IP Address,
Subnet Mask,
Gateway Address
DHCP/Autonet
*
, DHCP,
BOOTP, RARP, Panel
000.000.000.000
*
nnn.nnn.nnn.nnn
InternetServices Port Status
Enable
*
,
Disable
Enter when [Get IP Address]
is [Panel]
Displays the printer's IP address
when [Get IP Address]
is not [Panel]
Ethernet Auto
*
, 100M FullDuplex, 100M HalfDuplex,
10M Full Duplex, 10M Half Duplex
IPX/SPXFrameType
Network Settings
Auto
*
, Ethernet II, Ethernet 802.3,
Ethernet 802.2, Ethernet SNAP
FTP Port Status
Enable
*
,
Disable
StatusMessenger Port Status
Enable
*
,
Disable
Bonjour Port Status
Enable
*
,
Disable
Adobe Protocol Auto
*
, Standard, BCP,
TBCP, Binary
IP Filter No.1/Address
No.1/Mask
No.1/Mode
HTTP - SSL/TLS Enable / Disable Disable
*
,
Enable
000.000.000.000
*
000.000.000.000
*
Off
*
,
Permit, Reject
No.5/Address
No.5/Mask
No.5/Mode
000.000.000.000
*
000.000.000.000
*
Off
*
,
Permit, Reject
This item appears only when a certificate is registered in the printer.

Xerox Phaser 5335 Specifications

General

Brand	Xerox
Model	Phaser 5335
Category	Printer
Language	English