70 4 Paper
12. After entering the length, proceed to enter
the width.
Return to [Portrait (Y)] by pressing the < >
button.
13. Press the < > button.
[Landscape (X)] is displayed.
14. Press the < > button to accept the
selection.
The current setting is displayed.
15. Enter the width using the < > or < >
button and press the <OK/Eject>
button to confirm your entry.
(Example: 297 mm)
16. If setting other trays, press the < > button
until the screen in Step 8 is displayed, and
repeat the preceding steps.
If you are finished with the setting, press
the <Menu> button and return to the
print screen.
Tray 2 Custom
Portrait (Y)
Tray 2 Custom
Landscape (X)
Landscape (X)
75mm*
Landscape (X)
297mm
To Next Page
Loading...
