Xerox Phaser 7800

Network Configuration
34 Phaser 7800 Color Printer
System Administrator Guide
3. Under Backchannel Data:
 Enable Backchannel Data Transmission to Client, then, enable Out of Order Backchannel
Data to allow data from several jobs to be interspersed.
Note: Out of Order Backchannel Data is only available when Backchannel Data Transmission to
Client is enabled.
4. Under Banner Page Printing:
 To restrict banner pages to print for specific jobs only, select the job types from the Banner Page
Enabled drop-down menu. Options are First Job Only, No Jobs, or All Jobs.
 To enable banner pages to print before each PDL document within a single job, select Enabled
for Banner Page for Each Document of Job.
 To restrict banner pages to print for jobs that specifically request them through PJL, select
Enabled for Banner Page for Job Containing only PJL Commands.
5. Miscellaneous
 To allow the printer to switch between multiple PDLs within a single job, select Enabled for
Language (PDL) Switching within PJL Job.
 To force parsing of job data, select Enabled for Job Data Parsing Override.
Note: Job data is not parsed when bidirectional communication and PDL switching are disabled.
6. Click Apply to save the new settings or Undo to retain the previous settings.
Click Default All to reset settings to default values.