Xerox Phaser 7800 System Administrator Guide

Network Configuration
36 Phaser 7800 Color Printer
System Administrator Guide
HTTP
Hypertext Transfer Protocol (HTTP) is a request-response standard protocol between clients and servers.
Clients that make HTTP requests are called User Agents (UAs). Servers that respond to these requests for
resources, such as HTML pages, are called Origin Servers. There can be any number of intermediaries, such
as tunnels, proxies, or gateways between User Agents and Origin Servers.
Enabling HTTP at the Control Panel
1. At the control panel, touch Printer.
2. Touch the Tools tab, then touch Setup.
3. Touch Network & USB.
4. Touch Ethernet.
5. Touch Other Protocols & Services.
6. Select HTTP.
7. To enable CentreWare Internet Services, select CentreWare Internet Services.
8. Touch OK.
Configuring HTTP Settings in CentreWare Internet Services
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols.
2. Click HTTP.
3. Under Configuration, select Enabled to enable the protocol.
4. Change the HTTP Port Number if needed. The default is 80.
5. In Keep Alive Timeout, type the time between 1–60 seconds that the printer waits for a response
from a connected user before terminating the connection. The default time is 15 seconds.
Note: Increasing the Keep Alive Timeout can cause connections to slow down.
6. To encrypt HTTP communication using SSL, under Secure HTTPS, select Enabled. When SSL is
enabled, all Web pages contain https:// in the URL.
a. From the Choose Device Certificate menu, select the Device Certificate to use for SSL.
b. To view the selected certificate details, or save the certificate to your computer, click View/Save.
c. If you are using the Default Xerox
®
Device Certificate, you can install the Generic Xerox
®
Trusted CA Certificate in your Web browser. Installing the Generic Xerox
®
Trusted CA Certificate
ensures that your browser trusts the printer. To download the certificate, click Download the
Generic Xerox Trusted CA Certificate.
7. If necessary, change the Secure HTTP Port Number. The default is 443.
8. Click Apply to save the new settings or Undo to retain the previous settings.
9. Click Default All to reset settings to default values.

Xerox Phaser 7800 Specifications

General

Color	Yes
Duplex printing	No
Print technology	LED
Maximum resolution	1200 x 2400 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A3)	22 ppm
Print speed (black, normal quality, A4/US Letter)	45 ppm
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	225000 pages per month
Number of print cartridges	-
Page description languages	PCL 5c, PCL 6, PDF 1.6, PostScript 3
Total input capacity	3140 sheets
Total output capacity	- sheets
Maximum print size	297 x 420 mm
Paper tray media types	Photo paper, Plain paper
ISO A-series sizes (A0...A9)	A3, A4
Maximum ISO A-series paper size	A3
Security algorithms	HTTPS
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
USB 2.0 ports quantity	1
Storage media	HDD
Internal memory	2048 MB
Processor frequency	133 MHz
Internal storage capacity	160 GB
Display	LCD
Control type	Touch
Certification	Certified to UL 60950-1/CSA 60950-1-07, 2nd Edition, EMC Directive 2004/108/EC, EN 55024, EN 60950-1, 2nd Edition, FCC Part 15, Class A, Low Voltage Directive 2006/95/EC, RoHS Directive 2002/95/EC
Product color	White
Display diagonal	4.3 \
AC input voltage	110 V
Power consumption (printing)	- W
Operating temperature (T-T)	50 - 90 °C
Operating relative humidity (H-H)	15 - 85 %

Weight and Dimensions

Depth	699 mm
Width	641 mm
Height	578 mm
Weight	81 g