Xerox Phaser 7800 System Administrator Guide

Security
44 Phaser 7800 Color Printer
System Administrator Guide
FIPS 140-2
You can enable the printer to check the current configuration to ensure that transmitted and stored data
is encrypted as specified in Government Standard FIPS 140-2 (Level 1). If FIPS 140-2 encryption is
required, all computers, serves, browser software, security certificates, and applications must comply with
the standard or operate in FIPS-compliant mode.
To allow the printer to use non-FIPS compliant protocols or features when FIPS 140 mode is enabled,
acknowledge the notification of non-compliance during the validation process.
Note: Enabling FIPS 140 Mode can prevent the printer from communicating with network devices
that communicate using protocols that do not use FIPS-compliant encryption algorithms.
When non-FIPS compliant protocols, such as SNMPv3 or NetWare, are enabled after FIPS mode is
enabled, a message appears indicating the protocols use non-FIPS compliant encryption algorithms.
When you enable FIPS-140 mode, the printer validates the current configuration by performing the
following checks:
 Validates certificates for features where the printer is the server in the client-server relationship. An
SSL certificate for HTTPS is an example.
 Validates certificates for features where the printer is the client in the client-server relationship. CA
certificates for LDAP, Xerox Extensible Interface Platform (EIP), and SMart eSolutions are examples.
 Validates certificates that are installed on the printer, but not used. Certificates for HTTPS, LDAP, or
SNMPv3 are examples.
 Checks features and protocols for non-compliant encryption algorithms. For example, NetWare and
SNMPv3 use encryption algorithms that are not FIPS-compliant.
When validation is complete, information and links appear in a table at the bottom of the page.
 Click the appropriate link to disable a non-compliant feature, or protocol.
 Click the appropriate link to replace any non-compliant certificates.
 Click the appropriate link to acknowledge that you allow the printer to use non-compliant features
and protocols.

Xerox Phaser 7800 Specifications

General

Color	Yes
Duplex printing	No
Print technology	LED
Maximum resolution	1200 x 2400 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A3)	22 ppm
Print speed (black, normal quality, A4/US Letter)	45 ppm
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	225000 pages per month
Number of print cartridges	-
Page description languages	PCL 5c, PCL 6, PDF 1.6, PostScript 3
Total input capacity	3140 sheets
Total output capacity	- sheets
Maximum print size	297 x 420 mm
Paper tray media types	Photo paper, Plain paper
ISO A-series sizes (A0...A9)	A3, A4
Maximum ISO A-series paper size	A3
Security algorithms	HTTPS
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
USB 2.0 ports quantity	1
Storage media	HDD
Internal memory	2048 MB
Processor frequency	133 MHz
Internal storage capacity	160 GB
Display	LCD
Control type	Touch
Certification	Certified to UL 60950-1/CSA 60950-1-07, 2nd Edition, EMC Directive 2004/108/EC, EN 55024, EN 60950-1, 2nd Edition, FCC Part 15, Class A, Low Voltage Directive 2006/95/EC, RoHS Directive 2002/95/EC
Product color	White
Display diagonal	4.3 \
AC input voltage	110 V
Power consumption (printing)	- W
Operating temperature (T-T)	50 - 90 °C
Operating relative humidity (H-H)	15 - 85 %

Weight and Dimensions

Depth	699 mm
Width	641 mm
Height	578 mm
Weight	81 g