Xerox Phaser 7800 System Administrator Guide

Introduction
8 Phaser 7800 Color Printer
System Administrator Guide
Overview
This guide is designed for a system administrator with network administrator rights who understands
networking concepts and has experience creating and managing network user accounts.
Use this guide to help you install, configure, and manage your printer on a network.
Note: Network features are not available when you are connected over USB.
Configuration Steps
When configuring the printer for the first time, complete the following tasks:
1. Connect an Ethernet cable from your printer to the network.
2. Confirm that your printer is recognized on your network. By default, the printer is configured to
receive an IP address from a DHCP server over a TCP/IP network. If you have another type of
network, or want to assign a static IP address, see IP on page 21.
3. Complete the installation wizards. These wizards help you configure basic printer settings such as
your location, time zone, and date and time preferences.
4. Print a Configuration Report listing the current printer configuration. Review the report and locate
the printer IP address. For details, see Configuration Report on page 15.
5. Open a Web browser and type the IP address of your printer to access CentreWare Internet Services.
CentreWare Internet Services is the administration and configuration software installed on the
embedded Web server in the printer. For details, see Accessing CentreWare Internet Services on
page 14.
Note: Most configuration settings are located on the Properties tab in CentreWare Internet Services.
6. Print the Configuration Checklist. The Configuration Checklist provides space for you to write down
important information as you go through the configuration process. Use it to record information
about your network settings, including passwords, network paths, and server addresses.
7. Configure Authentication. For details, see Setting Up Access Rights.
8. Configure Security. For details, see Security on page 41.
9. Enable services in CentreWare Internet Services. For details, see Enabling Services.
10. Configure Accounting. For details, see Accounting.
Note: Not all printer models support these features.

Xerox Phaser 7800 Specifications

General

Color	Yes
Duplex printing	No
Print technology	LED
Maximum resolution	1200 x 2400 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A3)	22 ppm
Print speed (black, normal quality, A4/US Letter)	45 ppm
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	225000 pages per month
Number of print cartridges	-
Page description languages	PCL 5c, PCL 6, PDF 1.6, PostScript 3
Total input capacity	3140 sheets
Total output capacity	- sheets
Maximum print size	297 x 420 mm
Paper tray media types	Photo paper, Plain paper
ISO A-series sizes (A0...A9)	A3, A4
Maximum ISO A-series paper size	A3
Security algorithms	HTTPS
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
USB 2.0 ports quantity	1
Storage media	HDD
Internal memory	2048 MB
Processor frequency	133 MHz
Internal storage capacity	160 GB
Display	LCD
Control type	Touch
Certification	Certified to UL 60950-1/CSA 60950-1-07, 2nd Edition, EMC Directive 2004/108/EC, EN 55024, EN 60950-1, 2nd Edition, FCC Part 15, Class A, Low Voltage Directive 2006/95/EC, RoHS Directive 2002/95/EC
Product color	White
Display diagonal	4.3 \
AC input voltage	110 V
Power consumption (printing)	- W
Operating temperature (T-T)	50 - 90 °C
Operating relative humidity (H-H)	15 - 85 %

Weight and Dimensions

Depth	699 mm
Width	641 mm
Height	578 mm
Weight	81 g