c. Move lever 33aa to the right, then move lever 33dd to the right.
d. Use the cleaning rod to sweep any remaining waste or debris from inside the trimmer into the trimmer
waste container.
e. If you have difficulty sweeping waste into the trimmer waste container, use the cleaning rod to gather the
waste, then remove the waste by hand.
f. Return the levers to the original positions.
7. Ensure that all waste and debris is removed, especially beneath the frame that is behind the waste container.
Use the cleaning rod to remove any remaining waste from inside the trimmer.
Note: For information, refer to Emptying the Crease and Two-Sided Trimmer Waste Container.
8. Close the trimmer upper and lower covers.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 399
Crease and Two-Sided Trimmer
To Next Page
Loading...
Need help?
General