5. Load paper in the tray. Do one of the following:
• For long-edge feed:
• Insert letterhead and pre-printed paper face up with the top edge toward the back.
• Load hole-punched paper with the holes to the left.
• For short-edge feed:
• Insert letterhead and pre-printed paper face up with the top edge to the left.
• Load hole punched paper with the holes toward the front of the printer.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause paper jams.
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide 171
Paper and Media
To Next Page
Loading...
