Xerox VersaLink B71 Series - Adjusting the Altitude

ADJUSTING THE ALTITUDE
Use Adjust Altitude to adjust the altitude to match that of the location where the printer is installed. If the altitude
setting is incorrect, it can cause print-quality problems.
To adjust the altitude:
1. At the printer control panel, press the HHoommee button.
2. Touch DDeevviiccee >> SSuuppppoorrtt >> AAllttiittuuddee AAddjjuussttmmeenntt.
3. Touch the altitude of the location of the printer, then touch OOKK.
4. To return to the Home screen, press the HHoommee button.
200
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide
Maintenance