Xerox VersaLink B71 Series - Emptying the Hole Punch Waste Container

5. To close the stapler head, rotate the stapler head 180 degrees clockwise.
EMPTYING THE HOLE PUNCH WASTE CONTAINER
When the hole punch waste container is full, a message appears on the control panel.
Emptying the Hole Punch Waste Container in the Office Finisher
CCaauuttiioonn:: Do not perform this procedure while the printer is printing.
1. Lift the finisher transport top cover.
2. Pull out the hole-punch waste container.
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide 211
Maintenance