• For 2-sided printing, load letterhead or pre-printed paper face up with the top edge toward the back.
Load hole-punched paper with the holes to the left.
• For short-edge feed:
• For 1-sided printing, load letterhead or pre-printed paper face down with the top edge to the right. Load
hole-punched paper with the holes toward the front.
• For 2-sided printing, load letterhead or pre-printed paper face up with the top edge to the left. Load
hole-punched paper with the holes toward the front.
Note: Do not load paper above the maximum fill line on the width guides. Overfilling the tray can cause the
printer to jam.
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide 177
Paper and Media
To Next Page
Loading...
