3. Hold the tabs on both sides of the staple cartridge and pull the cartridge out of the finisher.
4. Hold the tabs on both sides of the new staple cartridge and insert the cartridge into the original position in the
finisher.
Note: If you have trouble inserting the cartridge, ensure that the staples are positioned correctly in the
cartridge.
Note: The booklet maker uses two staple cartridges. Booklet stapling requires that both staple cartridges
contain staples.
5. Repeat the procedure for the other staple cartridge.
6. Close the booklet maker side cover.
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide 209
Maintenance
To Next Page
Loading...
