CONDENSATION HAS FORMED INSIDE THE PRINTER
Moisture can condense inside a printer where the humidity is above 85% or when a cold printer is located in a
warm room. Condensation can form in a printer after it has been sitting in a cold room that is heated quickly.
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
The printer has been sitting in a cold room. Allow the printer to operate for several hours at room
temperature.
The relative humidity of the room is too high.
• Reduce the humidity in the room.
• Move the printer to a location where the
temperature and relative humidity are within the
operating specifications.
220
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide
Troubleshooting
To Next Page
Loading...
