7. Remove the jammed staples, then push the clamp in the direction shown until the clamp clicks into the locked
position.
WWaarrnniinngg:: The points of the jammed staples are sharp. Remove the jammed staples carefully.
8. Grasp the orange handle, then insert the cartridge into the stapler assembly until the cartridge clicks into place.
9. Close the finisher front door.
Clearing Booklet Staple Jams in the Office Finisher
CCaauuttiioonn:: Do not perform this procedure while the printer is printing.
1. Open the booklet maker side cover.
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide 239
Troubleshooting
To Next Page
Loading...
