Name: Xerox VersaLink B7125
Brand: Xerox
Rating: 5 (1 reviews)

To Next Page

To Previous Page

1. Pull out Tray 6 from the high-capacity feeder until it stops. Open the side gate until it stops.

2. Wait for the tray to lower and stop.

3. The control panel displays the paper tray settings. Ensure that you load the correct paper type

into the tray.

Note: Do not load custom-size paper into Tray 6.

4. Fan the edges of the paper before loading it into the paper trays. This procedure separates any

sheets of paper that are stuck together and reduces the possibility of paper jams.

Note: To avoid paper jams and misfeeds, do not remove paper from its packaging until

necessary.

5. Load the paper against the right side of the tray.

• Place letterhead or pre-printed paper face up with the top edge toward the back of the tray.

• Place hole-punched paper with the holes toward the left side of the tray.

Note: Do not load paper above the maximum fill line. Overfilling can cause paper jams.

169

Other manuals for Xerox VersaLink B7125

Questions and Answers:

Need help?

Do you have a question about the Xerox VersaLink B7125 and is the answer not in the manual?

General