Name: Xerox VersaLink B7125
Brand: Xerox
Rating: 5 (1 reviews)

To Next Page

To Previous Page

3. Load Number 10, C5, DL, or Monarch envelopes with flaps facing up and the long edge going into

the printer first.

Note: For envelopes to print correctly, when you load envelopes with the flaps open, in the

print driver, set the orientation as needed. To flip the images, in the print driver, select

Rotate Image 180 Degrees.

4. If the control panel prompts you, verify the size, type and color on the screen. If you are not

prompted, change the paper settings.

a. At the printer control panel, press the Home button.

b. Touch Device > Paper Trays.

c. In the Paper Trays menu, touch the bypass tray icon.

d. To select an envelope size, touch the current size setting, then select the required size.

Note: When you select an envelope size, the paper type defaults to Envelope.

e. To select an envelope color, touch the current paper color, then select an envelope color.

f. To save the settings, touch OK.

5. To return to the Home screen, press the Home button.

Loading the Envelope Tray

You can use the optional Envelope Tray in place of Tray 1. The Envelope Tray is a dedicated tray and

holds the following envelope sizes:

• Monarch and No.10

• DL and C5

To load the Envelope Tray:

1. Pull out the Envelope Tray until it stops.

172

Other manuals for Xerox VersaLink B7125

Questions and Answers:

Need help?

Do you have a question about the Xerox VersaLink B7125 and is the answer not in the manual?

General