4. The control panel displays the Paper Settings.
• To select a new envelope size, touch Size.
• To select a new paper color, touch Color.
Note: When you select an envelope size, the paper type defaults to Envelope.
5. To confirm the settings, touch Confirm.
Labels
You can print labels from any tray.
Guidelines for Printing Labels
• Use labels designed for laser printing.
• Do not use vinyl labels.
• Do not feed a sheet of labels through the printer more than once.
• Do not use dry gum labels.
• Print only on one side of the sheet of labels. Use full-sheet labels only.
• Store unused labels flat in their original packaging. Leave the label sheets inside the original
packaging until ready to use. Return any unused label sheets to the original packaging and reseal
it.
• Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions.
Storing labels in extreme conditions can cause print-quality problems or cause labels to jam in the
printer.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and
jam in the printer.
• In the print driver software, select Label as the paper type.
• Before loading labels, remove all other paper from the tray.
WARNING: Do not use any sheet where labels are missing, curled, or pulled away from the
backing sheet. It could damage the printer.
Loading Labels in Trays 1 and 2
1. Pull out the tray until it stops.
2. Ensure that the paper guides are set in the correct position for the size labels you are loading.
3. Remove any paper that is a different size or type.
174
To Next Page
Loading...
Need help?
General
