Xerox VersaLink B7125 User Documentation

2. To load labels in the tray, insert labels face up with the top edge toward the back. Stack the labels
against the left-rear corner of the tray as shown.
3. Slide the tray back into the printer.
4. At the control panel, select the correct paper type and color. Ensure that the paper type is set to
Labels.
Note: To change the paper settings when the tray is set to Dedicated mode, refer to
Configuring Tray Settings.
5. To confirm the settings, touch OK.
6. To return to the Home screen, press the Home button.
Loading Labels in the Bypass Tray
1. Open the bypass tray, then for larger sizes of paper, pull out the extension tray. Remove any
paper that is a different size or type.
2. Move the width guides to the edges of the tray.
177

Xerox VersaLink B7125 Specifications

General

Print Technology	Laser
Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Yes
Paper Output	250 sheets
Fax	Optional
Functions	Print, Copy, Scan
Scan Type	Color Flatbed Scanner
Automatic Document Feeder	100 sheets
Connectivity	USB, Ethernet
Processor	1.05 GHz
Memory	2 GB
Hard Drive	320 GB
Media Sizes Supported	A4, A5, B5, Letter, Legal
Scan Destinations	Email, USB, Network
Duty Cycle	Up to 107, 000 pages/month