Name: Xerox VersaLink B7125
Brand: Xerox
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Cleaning the Scanner

To ensure optimum print quality, clean the document glass regularly. Cleaning helps avoid output

with streaks, smears, and other marks that transfer from the glass while scanning documents.

1. Slightly dampen a soft, lint-free cloth with water.

2. Remove any paper or other media from the output tray.

3. Open the document cover.

4. Wipe the surfaces of the document glass and CVT glass until they are clean and dry.

Note: For best results, to remove marks and streaks, use Xerox

Glass Cleaner.

5. Wipe the white underside of the document cover until it is clean and dry.

6. Close the document cover.

Cleaning the Second-Side Scanning Lens Assembly

The second-side scanning lens assembly allows you to make 2-sided scans and copies with a single

pass of the original document. The assembly is on the left side of the document cover and includes a

mirrored glass strip, a metal strip, a white-plastic strip, and rollers.

Note: It is recommended that you clean all parts of the second-side scanning lens assembly

regularly.

Follow the below steps to clean the second-side scanning lens assembly

1. To access the second-side scanning lens assembly, do the following:

181

Other manuals for Xerox VersaLink B7125

Questions and Answers:

Need help?

Do you have a question about the Xerox VersaLink B7125 and is the answer not in the manual?

General