Name: Xerox VersaLink B7125
Brand: Xerox
Rating: 5 (1 reviews)

To Next Page

To Previous Page

5. To access the second-side scanning lens assembly, on the left side of the document cover, lower

the lever. Remove the original document in the direction shown.

6. If the original document is not visible when the document feeder is opened, close the document

feeder. Lift the document feeder tray, then remove the jammed paper.

7. Lower the document feeder tray.

8. If the original document is not wrinkled or torn, load document into the feeder again, following

the instructions on the control panel.

9. After clearing a paper jam from the Duplex Automatic Document Feeder, reload the entire

original document, including the pages already scanned. The printer automatically skips the

scanned pages and scans the remaining pages.

Caution: Torn, wrinkled, or folded original documents can cause jams and damage the

printer. To copy torn, wrinkled, or folded original documents, use the document glass.

Clearing Paper Jams from Trays 1–4

To resolve the error that appears on the control panel, clear all paper from the paper path.

1. Before removing the tray from the printer, review the paper jam message on the control panel. If

another jam error appears, clear that jam inside the printer first.

208

Other manuals for Xerox VersaLink B7125

Questions and Answers:

Need help?

Do you have a question about the Xerox VersaLink B7125 and is the answer not in the manual?

General