6. To adjust the length and width guides to fit the paper, pinch the guide locks, then slide the paper guides in until
they touch the paper.
7. Slide the tray back into the printer.
8. To change the settings to match the paper loaded in the tray, at the control panel, select the correct options for
paper size, type, and color.
9. To confirm the settings, touch OOKK.
To change the paper settings when the tray is set to Dedicated mode, refer to Configuring Tray Settings.
LOADING PAPER IN TRAYS 3 AND 4 OF THE TANDEM TRAY MODULE
The control panel displays a warning message when the paper in the tray is in short supply, or when a tray is empty.
To change the paper size in Trays 3 and 4, refer to Configuring Trays 3 and 4 of the Tandem Tray Module.
To load paper in Trays 3 and 4 of the Tandem Tray Module:
174
Xerox
®
VersaLink
®
C71XX Series Color Multifunction Printer User Guide
Paper and Media
To Next Page
Loading...
Need help?
General