• For 2-sided printing, load letterhead or pre-printed paper face up with the top edge to the left. Load
hole-punched paper with the holes toward the front.
Note: Do not load paper above the maximum fill line on the width guides. Overfilling the tray can cause the
printer to jam.
6. Adjust the width guides until they touch the edges of the paper.
7. To change the settings to match the loaded paper, at the control panel, select the correct options for paper
size, type, and color.
8. To confirm the settings, touch OOKK.
LOADING PAPER IN TRAY 6
The control panel displays a warning message when the paper in the tray is in short supply, or when the tray is
empty.
To change the paper size in Tray 6, refer to Configuring Tray 6.
Xerox
®
VersaLink
®
C71XX Series Color Multifunction Printer User Guide 179
Paper and Media
To Next Page
Loading...
Need help?
General