2. With a clean, lint-free cloth moistened with water, wipe the feed rollers until they are clean.
3. Close the document feeder top cover.
CLEANING THE INTERIOR
Clean the interior of the printer regularly to prevent stains inside the printer that can deteriorate print quality. Clean
the printer interior whenever you replace a drum cartridge.
After clearing paper jams or replacing a toner cartridge, inspect inside the printer before closing the printer covers
and doors.
• Remove any remaining pieces of paper or debris. For details, refer to Clearing Paper Jams.
• Remove any dust or stains with a clean, dry, lint-free cloth.
WWaarrnniinngg:: Never touch a caution-labeled area in the fuser. You can get burned. If a sheet of paper is
wrapped around the inside of the fuser, do not try to remove it immediately. Power off the printer
immediately and wait 40 minutes for the fuser to cool. Try to remove the paper jam after the printer has
cooled. If the error persists, contact your Xerox representative.
Cleaning the Printhead Lenses
The printer is constructed with four printhead lenses. The printhead lenses require regular cleaning to maintain print
quality. Clean the printhead lens every time the associated drum cartridge is replaced, or if print quality starts to
degrade.
CCaauuttiioonn:: Do not perform this procedure when the printer is copying or printing.
1. Open the front door of the printer.
2. Remove the waste cartridge:
198
Xerox
®
VersaLink
®
C71XX Series Color Multifunction Printer User Guide
Maintenance
To Next Page
Loading...
Need help?
General