Xerox Versant 80 Press - Page 8

Versant 80 Press
Customer Expectation & Installation Guide
Configuration Dependencies
The following dependencies are required for all or certain configurations:
Interface Module The Interface Module is required with any system configuration that has one or more finishing
devices, except the OCT or either BR Finishers.
Required on system configurations with:
 HCS
 Standard Finisher
 Booklet Maker Finisher
 Standard Finisher Plus
 GBC AdvancePunch Pro
GBC AdvancedPunch Pro Requires Interface Module plus:
 HCS
and / or
 Standard Finisher
 Booklet Maker Finisher
 Standard Finisher Plus
SquareFold Trimmer Module
This device requires the Interface Module and the Booklet Maker Finisher. The SquareFold
Trimmer
Module is not available with any other finishing device.
Standard Finisher Plus This device requires the Interface Module and a third-party finishing device.
BR Finisher
BR Booklet Finisher
 Must be ordered with V-Tra module
 Not compatible with any other finisher
 Does not require Interface Module
2-Knife Trimmer This device requires the Interface Module, the Booklet Maker Finisher and the SquareFold
Trimmer.
FreeFlow Print Server Hardware
Monitor, keyboard and mouse (included)
Furniture stand (optional)