Detailed Specifications  Xerox
®  
Versant® 80 Press 
 
Customer Expectation and Installation Guide  Xerox Confidential  15 
GBC AdvancedPunch 
Punch Dies 
The GBC AdvancedPunch is capable of punching a variety of hole-punch patterns by simply changing the punch die. Punch dies can be 
changed in seconds without tools. The punch dies currently available are listed below. Each die set has a 90 day warranty from date of 
purchase. In the Western Hemisphere, LTR (8.5 x 11 inch) punch dies are ordered using the Supplies ordering process; in Europe (A4) dies 
are ordered through sales representatives; please check for availability. 
 
Punch die life will be maximized if the wick material is lightly oiled every 50K punch cycles (approximately every month) with light 
machine oil such as 3-in-1 Oil. Small deposits of oil will be observed around the perimeter of the punched holes until the excess oil is 
absorbed (usually within 20 sheets). 
 
Stack Tray Capacity: 8.5 x 11 inch (LTR) Dies 
Punch Die Description  Xerox Part
Number (Ref.)
Stack Tray Capacity**
Xerox PB-19H (shipped w/ unit)  497N00216
2300-2700
Xerox PB-19H  008R13066
2300-2700
Xerox C4-44H  008R13067
3500-3900
Xerox W2-21H-SQ  008R13068
1400-1550
Xerox W3-32H-SQ  008R13069
1500-1700
Xerox VB-11H  008R13070
5000 
Xerox PC-32H  008R13071
1200-1450
Xerox 3H  008R13072
5000 
** Using removable HCS Tray Insert. Capacity may be reduced if HCS Tray Insert is not used. 
 
Stack Tray Capacity: A4 Dies 
Punch Die Description  Xerox Part Number (Ref.)
Stack Tray Capacity**
Xerox PB-20H, A4   498K19340
2500-3400
Xerox PB-21H, A4  498K19440
3800-4500
Xerox C4-47H, A4  498K19350
3600-4800
Xerox W2-23H- RND, A4  498K19360
2300-4100
Xerox W3-34H- RND, A4  498K19370
2300-4100
Xerox W2-23H- SQ, A4  498K19380
2200-4000
Xerox W3-34H- SQ, A4  498K19390
1500-3300
Xerox VB-12H, A4  498K19400
4800-5000
PC-34H, A4  498K19410
1000-1400
Xerox 2H-8mm, A4  498K19420
5000 
Xerox 4H-8mm, A4  498K19430
5000 
** Using removable HCS Tray Insert. Capacity may be reduced if HCS Tray Insert is not used. 
 
 
LTR (8.5 x 11 inch) Punch Dies